跳至主要内容

Performance Comparison For 4 Kind of Driving Motor



评论

此博客中的热门博文

Advantages and disadvantages of rare earth permanent magnet synchronous motor compared with squirrel-cage asynchronous motor

A :high efficiency and energy saving 1) no slip error, no fundamental wave loss of iron and copper on the rotor; 2) the rotor permanent magnet is used for excitation, and the power factor can reach 1, saving the reactive power. On the other hand, the stator current decreases, the stator copper loss decreases, and the efficiency increases. 3) the polar arc coefficient is generally greater than the polar arc coefficient of the asynchronous motor. When the power supply voltage and the stator structure are fixed, the average magnetic density is smaller than the asynchronous motor and the iron loss is smaller. 4) stray loss of rare earth permanent magnet synchronous motor: it is generally believed that the non-sinusoidal magnetic field of the permanent magnet increases the stray loss, but on the other hand, the large air gap of the rare earth permanent magnet synchronous motor reduces the stray loss. B :small size, light weight, high power density 1) analysis from the persp...

one kind of typical permanent magnet motor(PMSM)

EV/HEV driving motor supplier , LEGO, China yulongzhu@lego-motors.com

Interpretation of the standard of motor working system

1. Interpretation of the standard of motor working system The operating system of the motor indicates the permissible cycle time of the motor under different loads. The classification of the working system of the motor is the description of the load bearing condition of the motor, which includes the starting, electric braking, no-load, break-energy stopping and the duration and sequence of these stages. Iec60034-1 divides the working system into 10 categories. (1) continuous operation, S1. Continuous running S1 is an operation with constant load that lasts long enough to achieve thermal equilibrium. (2) short run, S2. A short run is a run with a load that is too short to achieve thermal balance. The interval (no voltage applied on the motor) is very long, which has actually reduced the motor temperature to the temperature of the cooling medium. The recommended duration of short operation is 10min, 30min, 60min and 90min. (3) start intermittent operation with no influ...